Another useful homemade product for children has been added to our collection - a wooden motorcycle, which every child, and perhaps some adults will be happy with:) Last summer was not productive for making it for a number of family reasons (disassembling and assembling furniture, etc.) and not It was worth committing to . However, by the time my grandson arrived at the dacha for the first time, he had managed to assemble an entire small toy from what he found. The wheels spin, the steering wheel turns, the ignition key (from the one with the bit cut off) is there, and both my grandson and I can talk tr-r-ttr. Photo-view straight.

The design is clear and visible from the presented photo. Almost everything is made from dry pine boards 130 x 40 mm. Imitation of motor cooling fins from 20 x 10 mm strips. The exhaust pipe is made of polypropylene pipe and the steering wheel is made of the same. TUT segments (heat-shrinkable tubes) were installed on the pipe and steering wheel and heated with an industrial fan. Wheels from the same board - photo 3.

Wheel diameter 280 mm. To imitate tires and for a soft ride - rubber from the tube on glue and brackets. Wheel axles are 150 mm nails, cut to length. They are not secured and can be pulled out freely, and then he takes a hammer and, under my guidance, tries to hammer it into place. Headlight cover from Nescafe. The steering wheel rotates on the axis by approximately 30 degrees. on both sides. The seat is soft and upholstered. The motorcycle, of course, is a bit heavy, however, my grandson can handle it (he is 3 years and 6 months old). At the bottom of the frame there is a folding, fixed footrest. The photo is a game moment and on the right is the leg of a father who wanted to help his son, who dealt with the “accident” himself.