Duration: 5 days
Distinctive feature of the course: a detailed discussion of the platform mechanisms, knowledge and ability to use which is necessary to successfully pass the "1C: Specialist" exam on the "1C: Enterprise 8" platform. Working with the platform mechanisms is demonstrated by solving an educational problem similar to exam tasks.
All platform mechanisms are studied to the extent necessary to pass the "1C: Specialist" exam on the "1C: Enterprise 8" platform.
After completing the training (within a month), course participants are given one free attempt to certify "1C: Specialist" on the 1C: Enterprise 8 platform (if they have a " " certificate for the platform). The "" certificate should be obtained in advance by passing the test at or.
Duration: 4 days
The consultation is intended for specialists preparing to pass the 1C:Specialist exam on the 1C:Enterprise 8.3 platform. The main emphasis is on practicing methodically correct programming and configuration techniques, the mastery of which is tested in the exam.
The consultation is of a practical nature and does not involve a detailed theoretical part of the lecture material.
After completing the training (within a month), course participants are given one free attempt to obtain a "1C: Specialist" certificate for the "1C: Enterprise 8.3" platform (if they have a " " certificate for the platform).
The " " certificate must be obtained in advance by passing the test in or.
Configuration in the 1C:Enterprise 8 system. Solving operational problems
| Course at Training Center No. 3 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |
|||||||||||||||||||||||||||||
| 15.08.2019 - 16.08.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 16.09.2019 - 20.09.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 19.09.2019 - 20.09.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 24.10.2019 - 25.10.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 18.11.2019 - 22.11.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 12.12.2019 - 13.12.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
Duration: 2 days
Purpose of training: to gain skills in configuring operational accounting tasks in the new system "1C:Enterprise 8.3" in the mode of a managed application and the "Taxi" interface. As a result of completing the training, students will be able to:
Be able to apply a scheme for solving operational problems;
Know how to use different ways writing data to registers and reading from them;
Be able to develop algorithms for reflecting documents in accounting;
Be able to develop analytical reports.
Configuration in the 1C:Enterprise 8 system. Solving calculation problems
| Course at Training Center No. 3 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cost: 7200 - full-time course, 10400 - full-time course + access to video materials for 6 months, 10800 - full-time immersion course, 7800 - WEB course (distance learning). |
|||||||||||||||||||||||||||||
| 05.08.2019 - 09.08.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 19.08.2019 - 21.08.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 23.09.2019 - 25.09.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 07.10.2019 - 11.10.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 09.12.2019 - 13.12.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 16.12.2019 - 18.12.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
Duration: 2.5 days
Learning goal: to develop skills in configuring calculation problems wages in the new system "1C:Enterprise 8.3" in managed application mode with the "Taxi" interface.
Independently design configuration objects “Plan of calculation types” and “Calculation register” to solve payroll calculation problems;
Programmatically generate movements in the calculation register;
Using virtual tables of the calculation register, obtain the necessary data for calculating accruals and deductions: the amount of the calculation base, the planned amount of working time for the period, the amount of time actually worked for the period;
Program the code for calculation formulas in various ways calculation;
Receive the amount of the calculation base in the context basic types calculation;
Generate reversing amounts to adjust the calculation results of previous (closed) periods;
Receive data from calculation registers required to perform recalculations;
Use the data composition engine to develop reports on accruals and deductions.
Configuration in the 1C:Enterprise 8 system. Solving accounting problems
| Course at Training Center No. 3 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cost: 7200 - full-time course, 10400 - full-time course + access to video materials for 6 months, 10800 - full-time immersion course, 7800 - WEB course (distance learning). |
|||||||||||||||||||||||||||||
| 12.08.2019 - 16.08.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 21.08.2019 - 23.08.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 23.09.2019 - 27.09.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 25.09.2019 - 27.09.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 30.10.2019 - 01.11.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 02.12.2019 - 06.12.2019 | 18:30 - 21:30 | Apply now | |||||||||||||||||||||||||||
| 18.12.2019 - 20.12.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
Duration: 2.5 days
Learning goal: to develop skills in configuring accounting tasks in the new system "1C:Enterprise 8.3" in the mode of a managed application and the "Taxi" interface.
As a result of completing the training, students will learn:
Independently design a chart of accounts and an accounting register to solve problems of synthetic, multi-company, analytical, quantitative and currency types accounting;
Correctly fill out the register with movements for all types of accounting, both when processing documents and when recording manual operations;
Describe optimal complex processing of conducting primary and regulatory documents with analysis of the results of the accounting register in multi-user mode when using configuration-controlled locks;
Use the data composition engine to develop any accounting reports, both summary synthetic and detailed analytical.
Duration: 4 days
The purpose of the course is to develop in students theoretical knowledge and practical skills in configuring and programming objects of the 1C:Enterprise 8 system related to personnel management and payroll within the framework of the 1C: Salary and Personnel Management application solution.
During the course, all topics are covered, the knowledge of which is tested in the "1C: Specialist" exam on the "Salary and Personnel Management" subsystems in the "1C: Enterprise 8" application solutions.
After completing the training (within a month), course participants are given one free attempt at 1C:Specialist certification in configuring payroll and personnel management subsystems in 1C:Enterprise 8 application solutions (if they have a 1C:Professional certificate under the 1C program :Salaries and personnel management" or "1C:Enterprise 8. Management manufacturing enterprise"). The "1C: Professional" certificate should be obtained in advance by passing the test at or
"1C:Enterprise 8". Implementation and adaptation of the "Enterprise Accounting" configuration (configuration in a standard solution)
Duration: 4 days
The course is intended for specialists planning to implement the Enterprise Accounting configuration. The purpose of the training is to study the structure of configuration objects, develop practical skills in correct configuration and programming to implement additional functionality of the “Enterprise Accounting” configuration. Training in the presented course will help specialists quickly and timely prepare for the implementation of the configuration, understand the structure of configuration objects, consider topics the knowledge of which is tested in the 1C:Specialist exam on the accounting subsystem in application solutions of the 1C:Enterprise 8 system, and thoroughly prepare for the specified exam.
Basics of working in a managed application. New opportunities to work in "1C:Enterprise 8"
| Course at Training Center No. 3 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cost: 7200 - full-time course, 10400 - full-time course + access to video materials for 6 months, 10800 - full-time immersion course, 7800 - WEB course (distance learning). |
|||||||||||||||||||||||||||||
| 23.09.2019 - 24.09.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 25.09.2019 - 25.09.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
| 20.11.2019 - 21.11.2019 | 10:00 - 17:00 | Apply now | |||||||||||||||||||||||||||
Duration: 2 days
The purpose of the course is to introduce students to the controlled mode of operation of the 1C:Enterprise 8 technology platform and to show specialists approaches to building a system for using the current version of the system.
The course examines the following capabilities of the system: the application interface construction model, the implementation of client-server architecture (programming in the client-server model), the forms mechanism and a number of other new mechanisms. During this part of the course, students will acquire practical skills in configuration, administration, and programming in the software package being studied. These skills will be acquired as the learning task is solved. The essence of this task is to configure the provided configuration to enable operation in “thin client” mode.
The course is intended: for specialists with experience in configuring application solutions on the 1C:Enterprise platform (versions 7.7, 8.0, 8.1, 8.2 - a regular application)."1C:Enterprise 8". Working with data
Duration: 1 day
The purpose of the course: to introduce students to the capabilities of the 1C:Enterprise 8 technology platform, which allow increasing the scalability of application solutions, as well as to show the possibilities of implementing regulatory mechanisms.
The course covers such important aspects work as a mechanism for object, transactional locking (including managed mode, which is the “default” mode in current versions of the 1C:Enterprise 8 platform), various causes of deadlocks (the most common cases), ways to “bypass” them, also The mechanism of operation of routine/background jobs and the features of using this mechanism in the file/client-server mode of the platform are considered. The material in this part will also be useful to specialists in the 1C:Enterprise 8 system who have used previous versions of the platform and are faced with problems with object and transaction locks.
Solving a problem similar to the problem of the "1C:Specialist" exam on the "1C:Enterprise 8" platform
Duration: 1 day
The purpose of the course is to analyze the solution to a problem SIMILAR to the problems that may be encountered when passing the "1C: Specialist" exam on the "1C: Enterprise 8" platform.
It is assumed that the problem is solved in a new interface model (Taxi interface), a controlled mode of operation with transaction locks will be used (taking into account the new capabilities of this version of the platform).
The course is intended for specialists with experience in configuring application solutions on the 1C:Enterprise 8 platform.
"1C:Enterprise 8". Implementation and adaptation of the "Payroll and personnel management" configuration (configuration in a standard solution)
Duration: 4 days
The course is intended for specialists planning to implement the “Salary and HR Management” configuration. The purpose of the training is to study the structure of configuration objects, develop practical skills in correct configuration and programming to implement additional functionality of the “Salaries and Personnel Management” configuration. Training in the presented course will help specialists quickly and timely prepare for the implementation of the configuration, understand the structure of configuration objects, and consider topics the knowledge of which is tested in the 1C:Specialist exam on configuring payroll and personnel management subsystems in application solutions of the 1C:Enterprise 8 system ", prepare thoroughly for the said exam.
"1C:Enterprise 8". Implementation and adaptation of a standard solution "Trade Management"
Duration: 4 days
The course is intended for specialists planning to implement the Trade Management configuration. The purpose of the training is to study the structure of configuration objects, develop practical skills in correct configuration and programming to implement additional functionality of the Trade Management configuration. Training in the presented course will help specialists quickly and timely prepare for the implementation of the configuration, understand the structure of configuration objects, consider topics the knowledge of which is tested in the 1C: Specialist exam on configuring trading solutions in the 1C: Enterprise 8 software system, and thoroughly prepare for the specified exam.
"Preparation for the 1C:Specialist exam in Accounting. Configuration and implementation of the accounting subsystem"
Duration: 5 days
The purpose of the course: preparation for the “1C: Specialist” exam on the accounting subsystem in application solutions of the “1C: Enterprise 8” system, studying the structure of configuration objects, developing practical skills in correct configuration and programming to implement additional functionality of the “Enterprise Accounting” configuration.
During the course, the main subsystems of a standard solution will be studied - the batch accounting subsystem, the maintenance mechanism tax accounting, month closing mechanism, VAT accounting subsystem, etc.
Duration: 5 days
The course is designed to train specialists in programming in standard solutions of the "1C:Enterprise 8.2/8.3" system: "1C: Trade Management, ed. 11", "1C: Accounting, ed. 3.0", "1C: Salaries and HR Management, ed. .3.0", "1C: Management of a small company", "1C: Retail, rev. 2.0", "1C: ERP Enterprise Management" and other configurations that include the functionality of "1C: Library of Standard Subsystems".
Exam preparation
1C:Platform Specialist
solving operational problems,
accounting and periodic settlements
During the course:
- under the guidance of an experienced trainer, you will solve 25 problems;
- master configuration techniques in accordance with the “Configuration Development Standards” prepared by methodologists of the development department of the 1C company;
- you'll figure it out typical mistakes problems encountered during practical implementation and on the exam, as well as ways to overcome them.
The course is taught by Pavel Belousov, who has been taking the 1C:Specialist exam for more than 20 years and is one of its developers. It’s unlikely that anyone can tell you more about the exam than he does.
It is important to know!
The "1C: Platform Specialist" certificate is in demand on the market. If you are an employee of a 1C franchisee company, its presence will not go unnoticed by your management and will have a positive impact on your salary.
The course is based on solving practical problems similar to those you will encounter in the exam. No template solutions, only experience own experience under the guidance of a professional teacher.
69% of students successfully passed the exam after completing the spring series of the exam preparation course (from among those who passed after the course).
Course Update:
- Number of lectures doubled, while the teacher will comment on all questions that arise during the course.
- Added 1 lecture and 5 online consultations, typical mistakes in homework assignments for the entire group will be examined.
- The frequency of classes is reduced for comfortable learning. Now the course is structured according to the scheme of alternating thematic blocks and periods of homework and self-study.
These changes create more comfortable conditions for learning and mastering the material covered.
Course program
|
from 17.00 to 21.00 |
|||
|
Arrangement of accounting registers Choose between accounts, subaccounts and dimensions The concept of “balance sheet”, “accounting characteristic”, “subconto accounting characteristic”, “working subconto” Beginning to solve a learning problem |
|||
|
Working with time |
Definition of calendar time Determination of working hours Determining actual time using the variance method Gantt chart |
||
You will solve 24 more problems!
Procedure for conducting the online course:
- The course is conducted online (with recording of materials provided)
- There are 11 online classes (from July 8 to July 31)
+ 6 consultations (from August 5 to September 9) from 17:00 to 21:00
- two forms of transferring materials: online consultation with a trainer and video recording.
- The lecture part is recorded and access to the video is provided to all participants in the online course.
- The trainer conducts an online consultation, answers questions and sorts out mistakes.
- After each consultation, participants receive homework to consolidate the material covered. Doing your homework is mandatory. At the same time, the trainer checks each task and gives feedback to all listeners.
After training (within a month), a free attempt to certify “1C: Specialist” on the “1C: Enterprise 8.3” platform is provided at 1C: Training Center No. 1 (for residents of Moscow and the Moscow region) and at the nearest Certified Examination Center (for others regions).
Course author
Belousov Pavel Stanislavovich
Candidate of Sciences, experience in teaching and using 1C programs - more than 15 years. Practicing examiner, one of the authors of the "Collection of tasks for preparing for the 1C:Specialist exam on the 1C:Enterprise 8.3 platform"
Student practice shows that you need to prepare for exams in advance. Exam 1C: Specialist is just one of those. We are opening registration for an online course to prepare for certification.
The author and presenter of the course is Pavel Belousov, teacher of 1C: Training Center No. 1. He has been taking the 1C:Specialist exam for 15 years and is one of its developers. It’s unlikely that anyone can tell you more about the exam than he does.
Course Features
The main emphasis of the course is on practicing methodologically correct programming and configuration techniques, the mastery of which is tested in the exam. Besides:
- the course includes two forms of transferring materials: video recording and online consultation with a trainer;
- the lecture part is recorded and access to the video is provided to all participants in the online course;
- After each consultation, participants receive homework to consolidate the material covered. Its implementation is mandatory!
- the trainer checks each task and gives feedback to all students.
At the end of the course, students will master configuration techniques in accordance with the “Configuration Development Standards” and will be able to be certified as a platform specialist for free "1C:Enterprise 8.3".
Bonuses for course participants
Infostart has provided a set of bonuses specifically for course participants:
- For the entire period of study, access to the Infostart catalog is provided with a limit 20 startmoney on account. This subscription can be used to download files from a set of publications in this special project
- 10% discount coupon for any course posted in the Infostart catalog.
- Free attempt to certify “1C:Specialist” for the platform "1C:Enterprise 8.3"(if you have a “1C: Professional” certificate for the platform) at the nearest Certified Examination Center of the “1C” company.
Cost and time
The course will run from March 11 to April 3, 2019. It consists of 11 online classes of 4 hours each and 6 additional consultations. Classes are held as scheduled: from 17.00 to 21.00 Moscow time.
It took a month and a half to prepare. I passed on the first try, but I had to work hard - the defense lasted an hour and a half, Pavel Stanislavovich Belousov took it (he is the creator of the exam rules, the author of the problems in the collection, 15 years of experience, has an academic degree). I really hoped that they would launch it earlier and I could add code templates and add subsystems, but a miracle did not happen.
Tickets are now arranged randomly, which means that the first task can be from 5 tickets, the second task from 13 tickets, and so on. 5 hours are allotted for everything. Having decided on the tickets at least once and understanding what, where, how and for what (this is where my solutions will help), you can do it in these five hours.
1.E This will give you the opportunity to express your thoughts directly to the teacher and the opportunity to argue with him. Who knows? Perhaps you will be right, or you will understand something for yourself once and for all.
2. Many people don’t know, but for the two thousand rubles that the exam costs, you are entitled to free lunch(take a coupon from the examiner, and hurry up, there may not be enough for everyone).
3. Entrance/exit from the audience is free, you don’t need to ask anyone for time off, you silently stood up and went about your business.
4. There is no need to describe all your actions in a text file (which is required for remote delivery). This gives you more time to solve the problems themselves.
5. If your result is a C or higher, you will immediately receive a paper certificate.
Rule number ONE:
Make a backup every ten minutes!!! The platform (and often the machines do not have the latest version of the platform) behaves strangely in some moments; you may simply lose some of your work and have to code again.
Infostart articles and third-party resources that helped me understand and comprehend all the subtleties and complexities of the 1C: Platform Specialist exam:
http://chistov.spb.ru/forum/16 - You should start your preparation from this site. You can also find current tickets compiled by the community there.
- Read carefully what mistakes you can make and what will happen to you for it.
You will learn a lot of smart things from the following publications:
- Notes for passing successfully .
- We solve problems related to business processes.
- Template for solving business process problems.
- We solve calculation problems.
Good luck with your passing and no worries!!!
*business processes are not solved in all tickets, because these are the same type of tasks, and solving the same thing every time gets boring. The publication does not contain the texts of the tickets themselves.
The goal of every novice implementer, programmer or administrator of 1C programs. The only way to become a certified holder is to pass a certification exam. Not everyone succeeds at this the first time - according to statistics, only four out of ten succeed. The exam is serious and requires you to demonstrate solid knowledge of the subject. This section will help you choose the best way to obtain this knowledge.
Exam selection
First of all, it is important to understand that “1C: Specialist” is a class of exams, each of which is designed to test a separate block of knowledge. Exams can be divided into 3 groups:
- 1C: Platform Specialist "1C: Enterprise 8"(tests understanding of the basic principles of designing configurations and technological solutions embedded in the 1C:Enterprise 8 platform and practical configuration and programming skills).
- 1C: Application Solutions Specialist"1C:Enterprise 8" (tests knowledge of the program's capabilities and the presence of practical design skills in the 1C:Enterprise environment to develop existing and add new functionality of application solutions. For example, Certification "1C: Specialist" for configuring and implementing an accounting subsystem in application solutions "1C:Enterprise 8").
- 1C: Specialist consultant for application solutions"1C:Enterprise 8" (tests the ability to find adequate program tools to solve specific user problems, correctly diagnose situations requiring changes/additions to the program, the ability to set correct tasks for programmers to adapt application solutions. For example, Certification "1C: Specialist Consultant "on the implementation of the application solution "1C: Accounting 8").
When choosing an exam, you need to consider the scope of your activity:
- if you specialize in software development, your goal is “1C: Specialist” for the “1C: Enterprise 8” platform;
- if you are going to refine application solutions produced by 1C, then you need the “1C: Application Solutions Specialist” exam;
- If you have good knowledge of a subject area, for example, tax accounting, and you want to become a consultant, teacher, or a link between programmers and users, take the “1C: Specialist Consultant” exam.
Exam preparation
Having chosen an exam, you need to carefully prepare for it. Preparation can take from several weeks to several months, depending on how organized you are and the time you are willing to spend on preparation.
The first stage of preparation: obtain the "1C: Professional" certificate. Before each "1C: Specialist" there is an admission exam - "1C: Professional", i.e. If you plan to take the "1C: Specialist" exam under the "1C: Accounting" program, then you first need to obtain a "1C: Professional" certificate under the "1C: Accounting 8" program or the "1C: Manufacturing Enterprise Management 8" program. The “1C: Professional” exam is a test; out of 14 test questions, you must answer at least 12 correctly. “1C: Professional”, like any other exam, must be prepared; without preparation, it is very difficult to pass. You can read more about preparing for the 1C: Professional exam on the 1C company website in the section “1C Courses / 1C Exams / 1C: Professional / Test Preparation”.
After you have the “1C: Professional” certificate in your hands, you will receive admission to the “1C: Specialist” exam. However, this does not mean that you need to immediately go and take it. You have just begun your preparations. If you are interested in the result, you need to continue to prepare.
There are three ways to prepare for the 1C:Specialist exam:
- take training courses;
- study methodological literature;
- accumulate personal experience work on setting up and adapting programs.
Ideally, the methods should be combined. Let's look at each of them in detail.
Training courses
The most preferred courses for preparing for the exam are:
- You will be given the minimum necessary theoretical knowledge in the subject area.
- Demonstrate methods for solving relevant exam problems.
- They will pay attention to the “subtleties” of one or another version of the examination task.
- During the courses, you have the opportunity to ask the teacher questions that arose while preparing for the exam on your own.
To prepare for the "1C: Specialist" platform exam, the following 1C courses are recommended:
- Comprehensive course "Configuration in the 1C:Enterprise 8 system" at the CSO;
- "Configuring the 1C:Enterprise 8 platform in 1C:Training Center No. 1.
- The mechanism of the data composition system in the 1C:Enterprise 8 platform;
- The mechanism of business processes in the 1C:Enterprise 8 platform;
- Data analysis and forecasting using the 1C:Enterprise 8 platform;
- Tools for integration and data exchange in the 1C:Enterprise 8 system;
To prepare for the "1C: Specialist" exam in applied solutions, the following 1C courses are recommended:
- "1C:Enterprise 8". Implementation and adaptation of the "Enterprise Accounting" configuration (configuration in a standard solution) in the CSO or a similar course in 1C: Training Center No. 1;
- "1C:Enterprise 8". Implementation and adaptation of the application solution "1C: Trade Management 8" in the CSO;
- "1C:Enterprise 8". Implementation and adaptation of the "Salary and Personnel Management" configuration in the central service center or Configuring payroll and personnel management subsystems in application solutions for "1C: Enterprise 8" in 1C: Training Center No. 1.
To prepare for the "1C: Specialist Consultant" exam in applied solutions, the following 1C courses are recommended:
- "1C: Accounting 8" version PROF (rev. 2.0) in 1C: Training Center No. 1
- Implementation of the application solution "1C: Trade Management 8" in 1C: Training Center No. 1
- Implementation of the application solution "1C: Salary and HR Management 8" in 1C: Training Center No. 1
An alternative to full-time courses is distance training provided by 1C: Training Center No. 3. The distance learning form has proven itself well in situations where a programmer is forced to study in the “background”, without interruption from work.
Methodological literature
Methodological literature is an excellent addition to training courses. A complete list of references is always available at.
Independent work
In courses and books you will learn methods of working with the program. These methods must not only be studied in theory, but also learned to use in practice. Therefore, independent work and practice will be a good addition when preparing for the exam. Most often, young, beginning specialists independent work not allowed, specially prepared for this case. This is roughly what problems look like in real life, and this is what the exam tickets are made from. It makes sense to take the exam only when the problems in the collection do not cause serious difficulties and when they have been solved. It is advisable to discuss the decision with an experienced specialist working with you at the enterprise (with a person who already has a certificate). If there is no such specialist, then it is recommended to take the course “Consultation for the 1C: Specialist exam” on the 1C: Enterprise 8.3 platform