The basis of a strong and reliable structure is a well-made foundation.

Over the course of many years, it will be affected by various external factors: heaving of the soil, the heaviness of the walls and roof, during winter precipitation the weight of the snow on the roof and much more.

As a result, it will sag, deform and gradually crack, and in the future this will lead to the complete destruction of the building.

Causes of violation of the integrity of the foundation and their elimination

To understand why it is necessary, you should turn to the properties of concrete itself. Concrete, in itself, is not elastic and very fragile; even with slight pressure it deforms. In different places the pressure exerted is uneven, therefore the forces exerting pressure on the foundation from all sides are different. As a result, places with zones of tension and compression are formed, and it is in the places of greatest tension that it begins to crack if it is not reinforced correctly.

It is precisely to eliminate such negative phenomena that metal rods or fittings are used. A metal frame is assembled inside the poured concrete, and all the pressure exerted is transferred to it. And since metal can withstand tensile pressure well, poured concrete responds better to external factors.

Return to contents

Tools needed for the job

When assembling the frame yourself and pouring concrete, you will need the following tool:

• when constructing a ditch and pouring concrete, you will need a water level; using it, it is very easy to level the parts of the frame over a long distance in a strictly horizontal position;
• to connect the rods you need pliers or a special knitting tool that uniformly tightens the connections;
• for cutting reinforcement - a grinder or an angle grinder with metal wheels (long-term operation is observed with diamond-coated wheels);
• when assembling wooden formwork, you cannot do without a hammer and construction nails or a screwdriver and self-tapping screws;
• To mix the solution, you will need a flat sheet of tin or a concrete mixer; using a mechanized method saves both the time and effort of workers.

During construction work You will need several more types of working tools: buckets and a construction wheelbarrow, a trowel or plasterer's trowel and much more. It is better to purchase such products as needed.

Return to contents

Types of strengthening buildings

In modern construction, 2 types of reinforcement are used:

• horizontal. When arranging it, the reinforcement bars are located at a horizontal level and allow you to evenly distribute the loads exerted on the structure from below, from the side of the soil, and compensate for the upper loads with their area;
• vertical. With the help of vertical reinforcement, corners and the entire foundation are strengthened under large horizontal loads on the base.

Separately, each of the above methods is very rarely used. Basically, they are combined. The assembled metal frame allows you to impart rigidity and elasticity not only to the foundation and all protruding corners and elements, but also to the entire building. A properly assembled metal frame will prevent cracking and destruction and save the building owner from subsequent and expensive major repairs, which the strip foundation will need if the advice is not followed.

Return to contents

Laying technology and reinforcement methods

The dimensions of the foundation are in most cases standard, i.e. the width most often does not exceed 0.4 m, and the length can reach any number of meters. But there can be significant differences in depth, since it must consist of several parts: soil freezing depth + 40-60 cm below freezing + above-ground part of the foundation 30-60 cm. And the soil freezing depth in different areas is different.

For high-quality and long-term operation, the strip foundation must be poured onto a kind of cushion - compacted sand up to 10-15 cm high and a layer of crushed stone or gravel up to 5 cm.

A lot of pressure is exerted on the surface of the foundation, so it is best to lay the reinforcement in the upper part. To ensure that the metal frame is not exposed to moisture and does not collapse from corrosion, the thickness of the concrete above it must be at least 5 cm.

Since pressure is exerted on the upper part, and underground forces exert pressure on the lower part, therefore it must be reinforced. There is no pressure on the cross section of the foundation. In order to reinforce the longitudinal parts, reinforcement with a diameter of 10-16 mm is used; for heavy loads, up to 32 mm can be used. For longitudinal connections, reinforcement with a diameter of up to 6-8 mm is used. For better adhesion between metal and concrete, you need to use ribbed reinforcement.

The corners and protruding parts of the foundation (bay windows and extensions) deserve special attention; they are reinforced with bent rods that are bent onto the adjacent walls. The reinforcement should be positioned so that the edges of the metal do not protrude and do not rest against the wooden frame of the formwork or the ground, the distance should be at least 3-5 cm. To connect the rods, it is recommended to use tying wire, because the use of welding violates the physical properties of the metal and makes the structure more fragile. A strict geometric frame assembly is used - rectangular or square.

When assembling a metal frame and pouring concrete into the lower part of the foundation, it is necessary to provide for the laying of communications (water supply and sewerage), while assembling the metal frame and pouring concrete, it is necessary to fill the voids with asbestos-cement or metal pipes.

To install the metal frame, metal pins are used; they are driven into the ground at a distance of up to 2 m. They will serve as the basis for attaching the upper and lower metal belts.

When pouring, the strip foundation in the above-ground part must be equipped with ventilation holes. To do this, in the places where the ventilation hole is planned, tubes filled with sand or crushed stone are installed to prevent the solution from getting inside. In order to reduce uneven pressure on the base and fill the foundation, you should use a water level.

During the summer heat, after pouring, it is better to let the finished base sit for 2-3 weeks, at least 1 week. It is necessary to ensure gradual drying; for this, the structure is watered several times a day and covered with various dense materials to prevent excessive evaporation of moisture.

If work is carried out in winter time, then the water for preparing the solution must be warm: this ensures the elasticity of the finished solution. In order to protect the solution from freezing, water repellents are added. They are used depending on the proportions indicated by the manufacturer of this composition.

After removing the formwork, you need to give a few days to give the concrete strength and you can start building the walls. But before their construction, horizontal waterproofing of the walls is carried out. For this purpose:

• waterproofing mastics applied to the base in several layers;
• roofing material (any base is suitable: fiberglass or polyester) or roofing material (its base is cardboard impregnated with bitumen);
• high density construction film.

Such protection protects the walls from the possibility of rising moisture from the foundation.

Proper construction of a reinforced frame will significantly extend the service life of the constructed building and will not require any hassle or repair work for many years.

How to reinforce a strip foundation and avoid mistakes

The key to the quality and durability of the future home is a reliable foundation. Click on photo to enlarge.

After choosing a site, drawing up a house plan, and conducting a soil analysis, you can safely begin building the foundation.

How high-quality the foundation of the house will be depends on many factors: the type of foundation, the quality of the concrete and its manufacturer, the correctness of waterproofing, drainage, and blind areas.

That is why during the construction process a logical question will probably arise: “How to reinforce a strip foundation?”

Correct reinforcement strip foundation usually performed using twisted metal rods with a diameter of 10-12 mm.

Particular attention should be paid to working with the corners of the base.

If the installation of reinforcement in a strip foundation is done incorrectly, the consequences will be very disastrous. Therefore, it is necessary to lay the rods overlapping, hooking them onto the vertical reinforcement.

The rods located in the inner part of the corners must intersect and reach the outer edge of the wall, otherwise the structure will be fragile.

Do I need to reinforce the strip foundation?

During the reinforcement process, it is necessary to strictly observe the distance between the rods. Click to enlarge.

Concrete, as is known, has high compressive strength and is not at all tensile strength.

However, this disadvantage is fully compensated by metal reinforcement, which is used to lay the lower and upper parts of the foundation along the strip.

It significantly increases bending and tensile strength.

Vertical reinforcement is auxiliary and provides shear strength. Such loads are insignificant, therefore the main function of vertical reinforcement is a stand that supports the lower and upper reinforcing chords.

It is important that the distance between the vertical reinforcement bars is 0.5-0.8 m.

To ensure that steel reinforcement is protected from negative influences environment, it should be filled with concrete to a level of 700 mm in the lower part and up to 40-60 mm in the upper part.

The distance between the reinforcement cores must be at least 0.3 m. As a rule, reinforcement is usually carried out using 2, 3, 4 rods in each belt.

What kind of reinforcement should be used in the process of laying a foundation?

It is impossible to reinforce the foundation without using hot-rolled metal reinforcement grades “A” - “W” with a periodic profile and a cross-section of 10-22 mm in diameter. The thickness of the rods must be calculated at the design stage. So, for working reinforcement it should be 10-22 mm, and for auxiliary reinforcement – ​​4-10 mm.

To understand how to properly reinforce a strip foundation, you must first find out in what sequence the reinforcement is knitted.

• Rods with a diameter of 8-10 mm are driven into the ground around the perimeter at a distance of 0.5-0.8 m from one another.
• 2 belts are knitted onto the vertical reinforcement - upper and lower; they consist of the main reinforcement.
• If everything is done correctly, you will get a strong and reliable frame that will not lose its shape after the concrete solution is poured.

What should the reinforcement technology be?

Correct reinforcement of a strip foundation should occur strictly in stages:

At the second stage, the formwork is built and the reinforcement process takes place. This involves driving vertical rods into the bottom of the dug trench, and the height of the rods should be the same as the height of the foundation.

The distance between the rods should be 2 m. Despite the fact that the vertical rods are not burdened with a special load, they make the structure more stable and reduce the risk that the reinforcing mesh is deformed when pouring cement.

Vertical rods are welded to horizontal ones at a distance of 5 cm from the edges of the foundation. The protruding part of the reinforcement should be no more than 8-10 cm. To ensure that the installation of reinforcing elements is uniform, builders often use bricks.

A very popular reinforcement method is the principle of tying reinforcement, since in this case the properties of the metal are not subject to change.

Professionals also advise strengthening the foundation. the width of which is in the range of 40-50 cm, using 4 longitudinal rods, installed at a distance of 0.2 modins from the other. The rods are formed into a square frame using thin wire.

Is it possible and is it necessary to reinforce a strip foundation on our own?

To determine the required amount of concrete, it is necessary to calculate the length, width and height of the base. Click to enlarge.

You should be especially careful and attentive when reinforcing the foundation yourself. The main thing you need to constantly pay attention to is the angles.

Experts advise installing bent rods at an angle in the corners, without leaving any joints.

After the fittings are installed, you need to make ventilation holes and fill everything with cement mortar.

To correctly determine how much concrete is required for the foundation, it is necessary to measure the width, length and height of the base contour.

The standard and most common tape width is a contour with a parameter of 20-40 cm.

If we talk about height, then when calculating it you need to take into account total amount depth and ground protruding part. It should be approximately 2 m.

The contour length is the perimeter of the external walls and the length under the internal walls.

Rules for reinforcement of monolithic foundations

Among the monolithic reinforced concrete foundations it is customary to distinguish:

Separate - foundations that are built under the columns. They come with single and multi-stage slabs. The sole is reinforced with a mesh with reinforcement. The working reinforcing bars must have a diameter of at least 10 mm, regardless of whether the reinforcement is welded or not.

If reinforcement is carried out using separate rods, then they must be laid mutually perpendicular.

Strip foundations. constructed in 2 directions under rows of columns or load-bearing walls. This version of a strip monolithic foundation is not much different from the above and is carried out immediately after installation of the formwork. The diameter of the reinforcement should be 12-14 mm. It can be either tied or welded, although the first option is still better.

Laying of reinforcement in a strip foundation should occur at a level of 5-7 cm from the surface. This is necessary so that the grid is located inside the foundation.

After this, you can begin to create ventilation and plumbing. To do this, you need to install an asbestos-cement pipe across the formwork and fill it with sand so that the solution can be poured into it.

An example of a strip base with laid reinforcement. Click on photo to enlarge.

But before doing this, it is necessary to determine exactly where the communications will be located. At least two such pipes should be installed.

As a waterproofing material, you can use roofing felt and resin, which will need to be used to cover the entire perimeter.

However, there are much more modern materials, such as Penetron, for example.

It must be added to the solution, thus protecting not only the edge of the foundation, but also making the entire hardened concrete waterproof.

To ensure that after pouring the solution there are no seams through which water can penetrate, it must be poured all at once.

The formwork should be compacted before pouring to prevent the possibility of air pockets.

http://ves-fundament.ru

Is it possible to pour a foundation without reinforcement? Don't rush and respond negatively. This turns out to be the subject of active debate and the answer is not always negative. Modern house building is not against such technology.

Is it possible to do without reinforcement in the foundation?

A foundation without reinforcement turns out to be completely inappropriate if the soils at the building site have some mobility. A strip foundation without reinforcement can simply be torn apart when the earth moves.

Is it possible not to reinforce the strip foundation?

For some types of soil, absolutely not. Eat clear example, in which a person decided to build a foundation on clay, in an area where most are built on stilts. As a result of his strip base It turned out to be torn in several places the very next season. not only strengthens strength, but also gives elasticity.

A strip foundation without reinforcement has a reduced service life in most cases.

Is reinforcement needed in a strip foundation?

In most situations it is necessary. There is no alternative. Saving on fittings is inappropriate here. Moreover, the optimal way to fasten a reinforced frame is knitting. Using a special binding wire, you can quickly create a high-quality and durable frame. If the connections are fastened by welding, the structure of the rod is damaged. Foundation without reinforcement in the process of mandatory shrinkage, which lasts about 5 years, with high probability. Therefore, saving on frame material is unacceptable.

Is it possible to pour a foundation without reinforcement?

Technically this is quite possible and can be done many times. But you should understand exactly how reinforcement works at the base of a building or structure. It does not allow the tangential forces that develop during frost heaving to damage the integrity of the base.

This means that the foundation may not have a frame only if there is no soil movement. Otherwise it is required.

Is it possible to lay a foundation by filling scrap metal with mortar without reinforcement?

Is it possible to make a foundation without reinforcement and replace it with another metal?

This is acceptable for outbuildings or small structures such as a fence. But you can’t make a foundation like this for a residential building.

Some experts point to old experiments when there was no reinforcement and the foundation was poured using whatever was at hand, including simple scrap metal. But this is a completely wrong approach to focus on outdated work methods. Therefore, scrap metal can only be used for small foundations on relatively stable soils.

Strip monolithic foundation without reinforcement

Is it necessary to reinforce a strip foundation?

It all depends on the initial technical indicators. If you begin to reinforce the base, then there are no questions. But if you decide to create a special foundation without reinforcement, then you should carefully study the underlying soils and their dynamics over the seasons. You also need to know exactly the technical indicators of the future home and the corresponding requirements for the foundation. Only after this can you answer whether the foundation needs to be reinforced or whether there are grounds for risk and implementation new technology. The choice is individual in each case.

Causes of violation of the integrity of the foundation and their elimination

The foundation is subject to constant and quite significant load. There are many reasons that lead to a violation of its integrity and destruction of the base belt. Therefore, before construction, you should accurately develop the foundation down to every detail and take into account all the negative factors that will “put pressure” on the foundation of the building - this is the only way to maintain its strength.

The slightest deformation of the foundation affects the entire structure, and it is very difficult to predict the nature of the deformation. It is better to prevent possible defects by following construction technology and rules for selecting materials.

The peculiarity of monitoring the foundation is that it is hidden from view. You have to monitor his condition based on indirect signs and it is important to be able to accurately recognize and recognize in order to take appropriate measures:

1. Deformations of buildings and structures, as well as individual components of buildings.
2. The appearance of cracks and breaks of various sizes and geometric characteristics.
3. Subsidence of soil around the perimeter of the building, as well as subsidence of the floor in the basement.
4. Destruction and deformation on the walls of basements.
5. Flooding of the area near the building.
6. Destruction and deformation of drainage and other communications.

There can also be many reasons that can cause destruction of the integrity of the base:

1. Design errors and engineering surveys at the drawing development stage.
2. Errors in the technology of work, including too much soil, poor compaction during backfilling, freezing of the soil and soaking it.
3. Violation of work during the construction of the foundation, including incorrect selection of concrete grade, incorrect reinforcement, incorrect selection of brick and stone, incorrect .
4. Errors during foundation operation. This category includes flooding of the basement, increasing the level of aggressiveness of water in the soil, and freezing of the foundation. Deformations are also possible when the foundation is overloaded, and destruction of the foundation when laying communications. In the event of seismic activity, a foundation that does not have additional strength quickly collapses.

Territorial and design features of a specific construction project determine its strength and reliability for a specific construction technology.

Forum / Foundations / Foundation without reinforcement. Is it possible to do this?

Ask your question on our forum without registering
and you will quickly receive an answer and advice from our specialists and forum visitors!
Why are we so sure of this? Because we pay them for it!

Find out details

How strong will the foundation of the house be if the mortar is poured without using metal reinforcement? Will it crumble and is it possible to make one of the sides of the foundation the same in height, but it will be narrower in width?

It won’t be durable, that’s for sure, just wasted concrete.

It can be done, but it is not necessary. Reinforcement is one of the elements of load-bearing structures. Without reinforcement, concrete will not withstand the load and will break. As for the width, I don’t understand, why make it narrower? Make it the same width and the load on the foundation will be distributed evenly.

Reinforcement gives the foundation integrity, that is, the structure is a single whole, which makes cracking or subsidence impossible.
I think that it will not crumble only if the length of the foundation walls is about three times greater than its height.

Concrete crumbles due to non-compliance with the conditions for its preparation and installation. And you can make a foundation without reinforcement. Eventually in foundation blocks no fittings.

My foundation was not reinforced. They poured a concrete cushion under the FBS, and then came the FBS blocks themselves.
I think that the decision on reinforcement should be made by the designer, based on geological data. Probably it all depends on the type of soil and the base on which you lay the pillow.

Dear guest, stay!

Many people are already making money just by communicating on our forum!
For example, like this. Or like this.
You can start communicating on the forum now. Just log in via VKontakte or register, it will take one minute.

But if you are passing through us, you can still:

The foundation is an integral part of the building that serves as support for the walls of the building. Construction of any building begins with pouring the foundation.

Bathhouse, country house, residential building - for all objects it is necessary to create a solid foundation on which the building will stand for a long time.

Most craftsmen advise reinforcing the foundations for any buildings, which increases the cost of construction.

Is it necessary to use fittings?

Before choosing a foundation pouring method, research the area where you plan to build.

Is it possible to pour a foundation without reinforcement?

Is there any in your area groundwater what properties the soil has, is there a possibility of flooding during spring floods, how deep does the soil freeze, is there a risk of earthquakes - all this needs to be taken into account.

Concrete has high compressive strength and extremely low tensile strength - even slight movements of the earth cause cracks and tears to appear in the foundation of the house.

Engineering-geological diagnostics of the soil should be done at the initial stages of design, and the results of laboratory studies will show whether reinforcement is needed.

In most cases, reinforcement is necessary; in our country, soils with a high degree of mobility predominate. Reinforcing rods increase the tensile strength of concrete several times, give it elasticity, and extend the service life of the foundation.

If you are sure that there is no need to reinforce the foundation: the soil in your area is motionless and extremely strong, there is no groundwater and there is no seismic danger, then no one has the right to dissuade you.

You make a decision at your own peril and risk. By saving money, you take responsibility for all possible risks.

If you refuse to reinforce the foundation of the house, sign an addendum to the contract with the construction team, which states that you will not make claims against them if the foundation cracks or subsides.

Scrap metal and stones instead of fittings

When you decide to reinforce the foundation, but still want to save money, use stones and scrap metal instead of reinforcement. The strengthening method is only suitable outbuildings(barn, stable, garage) and on very low-moving soil.

It is absolutely impossible to build a residential building on such a foundation. The main task when using such “reinforcement” is its competent, uniform distribution throughout the volume of the concrete mixture.

To improve adhesion to concrete, the reinforcement has a special ribbed surface, longitudinal and transverse protrusions; it is extremely strong and provides the foundation with resistance to tension and compression. Boulders, scrap metal and substandard bricks do not have such properties, so they cannot be considered a full replacement for reinforcing bars.

If you decide to make a foundation for a small-sized structure, you should not run to the store and buy expensive fittings. Metal products are suitable instead:

• Used corners;
• Used channels;
• Thick wire, various metal objects.

Of course, not any metal will replace fittings, but only high-quality metal, without visible signs of corrosion and rust.

Possible consequences

The foundation is constantly experiencing strong loads: the upper part is subjected to compression, the lower part is subject to tension. By depriving the foundation of reinforcement, you deliberately reduce the ability to withstand tensile loads by more than 10 times.

The walls of a house whose foundation is poured without reinforcement do not have a strong connection with each other, which is fraught with the appearance large quantity large cracks between them. Over time, a building can very quickly become unusable.

During the process of mandatory shrinkage of the house, which lasts at least 5 years, the foundation without reinforcement may crack, unable to withstand the loads. A slight deformation of the soil, frost heaving of the soil and its expansion when wet can lead to disastrous consequences that cannot be prevented.

Typically, a house that does not have fittings has an extremely short service life.

Often, following the foundation, the communications of the house are deformed and destroyed, in particular the sewerage system. The basement of the house is subject to flooding at the slightest precipitation.

conclusions

Building a house is not an easy and expensive task. Price quality foundation can amount to up to 15% of the cost of the entire house.

Russian people always try to find ways to save money, but building a foundation is a responsible matter and you cannot save on it.

Watch the video:

Don’t take unnecessary risks, otherwise, by investing your money in other materials, but saving on reinforcement, you risk getting an unsatisfactory and unpredictable result in the form of cracked walls and sagging foundations.

There will be even greater losses associated with the demolition of the deformed foundation and new construction.

Concrete without reinforcement=? or reinforced concrete

Ordinary concrete has some disadvantages that remain regardless of the brand of cement used and the careful selection of admixtures. One of these disadvantages is the insufficient strength of load-bearing structures made of pure concrete. However, the material itself is too good to abandon it in favor of metal structures, and besides, it is much cheaper. Reinforced concrete solves the problem of strength and economy in concrete production. It is concrete reinforced with reinforcement that becomes the basis for multi-story buildings and large industrial sites.

Deformation of the structure due to compression and tension

How exactly does reinforcement help make reinforced concrete so strong? Any load-bearing structure made of concrete is subjected to compressive and tensile loads, which causes temporary or permanent deformation. To understand how deformation works, you can imagine a large block of rubber in place of a reinforced concrete slab, which is compressed, stretched and bent according to certain rules. Concrete is subject to almost the same laws of physics, although its deformation is less noticeable to the eye. And excessive deformation of insufficiently strengthened concrete will cause destruction of structures, which can lead to the building becoming unsafe.

Pure concrete, although it looks quite strong, breaks down with relatively little effort. Therefore, it is used where only one type of deformation is expected at one time. Bearing structures in buildings require greater strength and flexibility. A steel reinforcement bar can withstand significant loads compared to solid concrete; it can withstand a hundred times greater tension than the strongest unreinforced concrete. Thus, steel rods are capable of holding entire concrete slabs from severe deformation, taking on many types of loads, including sudden vibrations.

Is it possible to pour a strip foundation without reinforcement?

It is important to select reinforcement of a certain cross-section so that it fits well into the concrete without creating cavities or weak areas in the slab. Adhesion can be enhanced by allowing the concrete to sit for a long time after pouring, as well as by increasing the initial roughness of the steel rods. The steel itself adheres well to concrete, and they have approximately the same physical properties in terms of temperature changes - for example, they change their volume equally. Additional strengthening occurs when the concrete shrinks - it compresses the steel rods so tightly that they practically become an integral part of the finished reinforced concrete slab. Reinforced concrete becomes part of durable walls, floors and ceiling slabs in residential and industrial buildings.

Since concrete is a weak conductor of heat, steel reinforcement is reliably protected from one of its main disadvantages - fragility during sudden temperature changes. The reinforcement inside a reinforced concrete slab is practically not affected by temperature in the hottest or coldest seasons of the year.

The foundation is an integral part of the building that serves as support for the walls of the building. The construction of any building begins with pouring the foundation.

A bathhouse, a country house, a residential building - for all objects it is necessary to create a solid foundation on which the building will stand for a long time.

Most craftsmen advise reinforcing the foundations for any buildings, which increases the cost of construction.

Before choosing a foundation pouring method, research the area where you plan to build. Is there groundwater in your area, what properties does the soil have, does it exist during spring floods, how deep does the soil freeze, is there a risk of earthquakes - all this needs to be taken into account.

Concrete has high compressive strength and extremely low tensile strength - even slight movements of the earth cause cracks and tears to appear in the foundation of the house.

Engineering-geological diagnostics of the soil should be done at the initial stages of design, and the results of laboratory studies will show whether reinforcement is needed.

In most cases, reinforcement is necessary; in our country, soils with a high degree of mobility predominate. Reinforcing rods increase the tensile strength of concrete several times, give it elasticity, and extend the service life of the foundation.

If you are sure that there is no need to reinforce the foundation: the soil in your area is motionless and extremely strong, there is no groundwater and there is no seismic danger, then no one has the right to dissuade you. You make a decision at your own peril and risk. By saving money, you take responsibility for all possible risks.

If you refuse to reinforce the foundation of the house, sign an addendum to the contract with the construction team, which states that you will not make claims against them if the foundation cracks or subsides.

Scrap metal and stones instead of fittings

When you decide to reinforce the foundation, but still want to save money, use stones and scrap metal instead of reinforcement. The strengthening method is suitable only for outbuildings (barn, barn, garage) and on very weak soil.

It is absolutely impossible to build a residential building on such a foundation. The main task when using such “reinforcement” is its competent, uniform distribution throughout the volume of the concrete mixture.

To improve adhesion to concrete, the reinforcement has a special ribbed surface, longitudinal and transverse protrusions; it is extremely strong and provides the foundation with resistance to tension and compression. Boulders, scrap metal and substandard bricks do not have such properties, so they cannot be considered a full replacement for reinforcing bars.

If you decide to make a foundation for a small-sized structure, you should not run to the store and buy expensive fittings. Metal products are suitable instead:

• Used corners;
• Used channels;
• Thick wire, various metal objects.

Of course, not any metal will replace fittings, but only high-quality metal, without visible signs of corrosion and rust.

Possible consequences

The foundation is constantly experiencing strong loads: the upper part is subjected to compression, the lower part is subject to tension. By depriving the foundation of reinforcement, you deliberately reduce the ability to withstand tensile loads by more than 10 times.

The walls of a house whose foundation is poured without reinforcement are not connected to each other, which is fraught with the appearance of a large number of large cracks between them. Over time, a building can very quickly become unusable.

During the process of mandatory shrinkage of the house, which lasts at least 5 years, the foundation without reinforcement may crack, unable to withstand the loads. A slight deformation of the soil, frost heaving of the soil and its expansion when wet can lead to disastrous consequences that cannot be prevented.

Typically, a house that does not have fittings has an extremely short service life.

Often, following the foundation, the communications of the house are deformed and destroyed, in particular the sewerage system. The basement of the house is subject to flooding at the slightest precipitation.

conclusions

Building a house is not an easy and expensive task. The price of a high-quality foundation can be up to 15% of the cost of the entire house.

Russian people always try to find ways to save money, but building a foundation is a responsible matter and you cannot save on it.

Watch the video:

Don’t take unnecessary risks, otherwise, by investing your money in other materials, but saving on reinforcement, you risk getting an unsatisfactory and unpredictable result in the form of cracked walls and sagging foundations. There will be even greater losses associated with the demolition of the deformed foundation and new construction.