Task for designing repairs of an industrial building. Technical task. Electrical and electrical installation products

Prepare adjustments to design and working documentation in full accordance with:

Town Planning Code of the Russian Federation;
Government of the Russian Federation dated February 16, 2008 No. 87 “On the composition of sections project documentation and requirements for their content":
Engineering surveys, design and working documentation.
Develop sections:

“Requirements for ensuring safe operation of the facility capital construction»;

Federal Law of July 22, 2008 No. 123-FZ “ Technical regulations about the requirements fire safety»;

Federal Law of December 30, 2009 No. 384-FZ “Technical Regulations on the Safety of Buildings and Structures”;

Fire safety standards NPB 88-2001 “Installation of fire extinguishing and alarm systems”;

SP 118.13330.2012*. "Set of rules. Public buildings and structures. Updated version of SNiP 31-06-2009";

Federal Law No. 261-FZ dated November 23, 2009 “On energy saving and increasing energy efficiency and on introducing changes to certain legislative acts Russian Federation»;

"SP 59.13330.2012. Set of rules. Accessibility of buildings and structures for people with limited mobility.

Updated version of SNiP 35-01-2001" (in terms of items included in the List of national standards and codes of practice (parts of such standards and codes of practice), as a result of which, on a mandatory basis, compliance with the requirements is ensured Federal Law dated December 30, 2009 No. 384-FZ

“Technical Regulations on the Safety of Buildings and Structures”, approved by Decree of the Government of the Russian Federation of December 26, 2014 No. 1521);

"SP 59.13330.2016. Set of rules. Accessibility of buildings and structures for people with limited mobility. Updated edition of SNiP 35-01-2001";

SP 132.13330.2011 “Ensuring anti-terrorist security of buildings and structures. General requirements design.";

GOST R 21.11.01.2013 “System of design documentation for construction. Basic requirements for design and working documentation", as well as in accordance with other regulatory documents in force on the territory of the Russian Federation as of the date of issue of project documentation.

The developer of the design documentation, by his statement, confirms the mandatory assessment of the compliance of the design documentation with the requirements of Federal Law No. 384-FZ of December 30, 2009 “Technical Regulations on the Safety of Buildings and Structures.”
Prepare a project passport for placement in information system Ministry of Construction.
The project will be completed in accordance with the requirements of the Decree of the Government of the Russian Federation dated November 12, 2016 No. 1159 “On the criteria economic efficiency design documentation", including the cost indicators of the design documentation should not exceed the construction price standards for similar objects.
Additionally, provide sections of the project:

Safety data sheet for the facility, including measures to counter terrorist acts;
Fire alarm system output to the private security console and equipped with a panic button;
Fire safety declaration;
energy efficiency certificate of the facility;
server room equipment with Internet access;
develop the PIC section in accordance with methodological recommendations MDS 12.81.2007 “On the development and execution of a construction organization project and a work execution project.”

In the project of electrical equipment and electric lighting of the facility, use economical and energy-efficient equipment that meets the requirements of state standards.
Composition and content of sections of working documentation (working drawings, estimate documentation, bill of quantities for construction and installation work, drawings, collections of specifications) perform in accordance with state standards. For the equipment specified in the specifications for the project, provide technical parameters for the proposed brand.
Design solutions and estimate documentation for off-site utility networks to the border land plot and divide intra-site networks.
In the list of filling window and door openings, indicate the air permeability class of these structures, including the use of frost-resistant plastic profiles, and provide mosquito nets. Perform engineering load calculations (heat supply, water supply, water disposal, electricity supply, outdoor lighting, telephone installation, radio installation) for the Customer to request technical specifications from the organization of network holders necessary for the engineering support of the facility.
Implement a project for temporary power supply construction site and organization of accounting of consumed resources.
Execute the master plan, master plan utility networks taking into account the coordinates of the boundaries of the land plot allocated to the Customer for the design and construction of the facility, project passport, outdoor lighting project.
Obtain the necessary approvals and conclusions supervisory authorities.
The supplier guarantees compliance with the design and estimate documentation requirements of the Decree of the Government of the Russian Federation dated February 16, 2008 No. 87 “On the composition of sections of project documentation and requirements for their content” and ensures the elimination of comments in order to obtain a positive expert opinion.

Any work to create a technically complex device, system or structure requires carefully calibrated calculations and actions, analysis and assessment of the fundamental factors for further work. On the one hand, design includes calculations and details, but in order to get to the project, you still need to make an assessment and analyze the feasibility of creating an object. For this purpose, technical specifications for the design are carried out.

Often, customers take the technical specifications lightly, do not carry out the necessary procedures, evaluate many factors superficially, and as a result, they encounter problems at the design stage or when performing the work itself. Such an attitude is caused by haste or negligence, and this is unacceptable in work, therefore technical report special attention is paid.

The technical specifications are developed by the customer, but quite often the creator-designer also participates in the process. Leading specialists are involved on the customer’s side, because the preparation of such a document requires enormous knowledge and experience in a certain field. The document is legal and is included in the contract between the parties.

The essence and concept of technical specifications is as follows:

Defining clear criteria for performing work based on goals, objectives, deadlines, results, etc. Thanks to this, it is possible to identify errors and eliminate shortcomings at any stage of the work;
Regulation of the liability of the parties, because the document was agreed upon and mutually accepted. Sometimes each stage of work is agreed upon separately so that, as a result of errors, the degree of guilt of each party is clearly determined, and the amount of damages is distributed in accordance with this;
Compiled on the basis of clear calculations and scientific research, therefore practically eliminates the “failure” of events;
It is written in an accessible form, without using complex professional terminology, which makes it understandable to the common man. This is a very important point, because failure to comply with certain standards due to a lack of information may lead to sanctions from supervisory authorities, because “ignorance is no excuse.”

In most cases, the outcome of any project depends on a well-written technical specification. Therefore, its creation is carried out by people with high qualifications and an impeccable reputation.

Thanks to the technical specifications, the contractor and the customer can outline the boundaries of their responsibilities and capabilities:

From the customer's side:

Understand how to act based on available resources and technical knowledge;
Demand strict execution of all points of the document from the contractor.

From the performer's side:

Design a technical layout of the future facility;
Develop a sequence plan;
Do not accept the offer at all or refuse those works that are not specified in the terms of reference or cannot be performed.

At both sides:

Reduce the number of inaccuracies and errors;
Arrive at a general view of the finished object;
Perform coordination of work after each item.

Important! The customer is always responsible for the accuracy of the data that was provided by him when drawing up the technical specifications.

Structure and how to compose correctly

After the customer determines the goals and objectives for creating a new structure, device or system, he can safely proceed to drawing up technical specifications. It must contain the required information:

List of documents required for work and study by both parties;
Technical parameters of the object, consumer properties and the need for creation;
Economic data;
The procedure for accepting work and submitting the entire order.

In addition, clauses on preparation and commissioning may be added to the technical specifications, individual requirements, which do not contradict standard norms.

Note! If custom development will improve the efficiency indicators of the facility, then they need to be agreed with the State Standard of the Russian Federation and obtain permission for use. But here we are not talking about those requirements that relate to the protection of health and nature, and are also responsible for safety - they cannot be changed!

The structure and composition of the document will be approved based on the type of product being designed. But, in general, the technical specification should contain the following information:

List of documentation for creating an object;
Time frames for stages of work from start to finish;
Data about financial sources projects, the order of their distribution;
The sequence of delivery of work to the customer, making adjustments;
Goals and meaning of the object;
Main parameters and characteristics of the object;
Requirements for the object as a whole and its functions separately;
Scope of work and their content;
The procedure for monitoring the work, acceptance of the facility and its commissioning;
List of requirements for preparation and commissioning;
The procedure for documentary support at the work stage and after the commissioning of the object;
Indication of the main sources of information according to which the technical specifications were developed and according to which the created object should function.

In one form or another, such information must be present in the technical specifications before it is transferred to the project, and each point must be justified and deciphered. The main goal is to make the designer’s work easier and reduce time.

To prepare technical specifications, materials based on patent data, scientific and technical data, and data are studied and used market economy etc.

Sample form

For clarity, we have presented a sample technical specification for the design of a structure.

№	List of requirements and basic data	Description
1.	Basis for creation and design	Target program at the federal level Program of subjects of the Russian Federation Municipalities program Creation by decision of the President of the Russian Federation, the Government of the Russian Federation and other authorized bodies At the initiative of the developer company
2.	Type of construction	New building Reconstructed Intended for major repairs or current
3.	Design stages	The stages of design work are listed here: creating a project required documentation working layout sketch layout, etc.
4.	Work options being considered	Information about works for comparison or ongoing competitions for the selection of design solutions is recorded
5.	Financial sources	Funds from federal budget Regional Municipal Extrabudgetary funds
6.	Working conditions requiring special attention	Describe such conditions or provide recommendations for overcoming them
7.	Technical parameters of the object	Provided detailed information about the building’s capabilities, purpose, technical characteristics (number of floors, number of entrances), etc. Everything you need to understand socio-economic importance
8.	Data on built-in premises	If the area of residential buildings is planned to be partially given over to public or other organizations, then this item must be filled out
9.	Qualitative indicators of the building, indicating environmental safety, competitiveness and feasibility	All data on the construction of technically significant production facilities, the placement of its individual units, the technology of their construction, and the arrangement of equipment are indicated here.
10.	Requirements for the materials used and the correct placement of areas for various purposes of the structure	Data on the correct placement of individual areas is prescribed, and the material of work that is more effective in a particular area is described.
11.	Requirements for architectural and cultural works	Describes the planned work to improve the surrounding areas
12.	Engineering and technical plan requirements	Describe ventilation, sewerage, water supply systems, etc.
13.	Requirements for staged commissioning of the facility	Information is provided on each object of the complex and its individual parts. Information is required on terms, conditions of delivery and commissioning
14.	Requirements for the development of environmental measures	This describes the impact of the building on environmental situation and the environment
15.	Requirements for providing conditions for certain groups of citizens	Data on structural elements intended for the disabled, the elderly and children.
16.	Occupational safety and health requirements	Materials on the topic of occupational safety and health of workers in the future building are being written. Suitable for industrial buildings.
17.	Requirements for sanitary and epidemiological standards	Describe documents for inspection organizations: Rospotrebnadzor, SES, etc.
18.	Fire safety requirements	Description of compliance with fire safety regulations
19.	Requirements for materials for demonstration	To be filled in when using 3D layouts and presentations
20.	Additional requirements	Special requirements introduced by the customer himself as necessary, but within the framework of existing standards

In accordance with this sample, you can create a technical specification for any project by adding or excluding some items.

The page provides a brief description general order placing an order for design work. In each individual case, one should be guided by the requirements of legislative and regulatory documentation, depending on the purpose of the object and goals design work.

Obtaining initial permitting documentation.

Town Planning Code of the Russian Federation, Article 48. Architectural and construction design:

“... In the event that the preparation of project documentation is carried out by a physical or legal entity on the basis of an agreement with the developer or customer, the developer or customer is obliged to provide such person with:

urban planning plan of the land plot;
results engineering surveys(if they are absent, the contract must provide for the task of performing engineering surveys);
technical conditions (if the functioning of the designed capital construction facility cannot be ensured without connecting such a facility to engineering support networks).

Specifications, providing for the maximum load and timing of connecting capital construction projects to engineering support networks, the validity period of technical conditions, as well as information on connection fees is provided by organizations operating engineering support networks, without charging a fee within fourteen days at the request of authorities local government or copyright holders land plots. The validity period of the provided technical conditions and the connection fee period are established by organizations operating engineering support networks for at least two years, except for cases provided for by law Russian Federation. The owner of the land plot, within a year from the moment of receiving the technical conditions and information about the connection fee, must determine the required load to be connected to the engineering support networks within the limits of the technical conditions provided to him.

... The local government body no later than thirty days before the day of the relevant auction, or before the day of making a decision on the provision of a land plot located in state or municipal ownership for construction, or before the day of making a decision on preliminary approval of the location of a capital construction project, provides interested parties, technical conditions for connecting to utility networks, providing for the maximum load, the period for connecting a capital construction project to engineering networks, the validity period of technical conditions, information on the connection fee, as well as on the fee for technological connection to electrical networks... "

Technical specifications for design (sample filling)

	List of basic data and requirements	Description
	Basis for design	Federal target program. Development program for a constituent entity of the Russian Federation. Development program municipality. Departmental target program. Decision of the President of the Russian Federation, the Government of the Russian Federation, state authorities of the constituent entities of the Russian Federation and local governments in accordance with their powers. Developer's decision.
	Type of construction	New construction. Reconstruction. Major renovation. Maintenance.
	Staged design	Project. Working documentation. Project and working documentation – two-stage design. Working draft. Preliminary design. Feasibility study.
	Requirements for variant and competitive development	Specify requirements if a comparison of design options is required.
	Source of financing	Federal budget. Regional budget. Municipal budget. Extrabudgetary funds.
	Special construction conditions	Provide a description of such conditions, if any, or provide instructions for the implementation of the project if such conditions arise during the design and construction process.
	The main technical and economic indicators of the facility, including power, productivity, manufacturing program, including residential or public buildings, their purpose (number of floors, number of sections and apartments, capacity or throughput)	Short description design object indicating its main indicators or consumer qualities that must be obtained during the design process.
	Purpose and types of built-in residential buildings public service enterprises, their capacity, capacity, throughput, composition and area of premises, construction volume	To be filled in if such objects are included in the design object. Applies to residential buildings.
	Requirements for the quality of competitiveness and environmental parameters of products. Requirements for technology, enterprise mode	Specify the requirements for production technology - a technological task describing in detail the production technology, required loads from process equipment, special requirements for the placement of process equipment, required areas, special conditions, describing the production process and so on. We pay special attention to the importance of preparing a technological specification, since the functionality of the design object and its suitability for the customer’s needs largely depend on its quality. Many large organizations, especially network companies, have detailed description requirements for technological processes.
	Requirements for architectural, construction, space-planning and structural solutions, blocking conditions, building finishing
	Requirements for landscaping and small architectural forms	A description of the requirements for landscaping the adjacent territory, planting plants, laying access roads, pedestrian paths, parking lots, playgrounds etc.
	Basic requirements for design solutions and materials of load-bearing and enclosing structures	Specify the requirements for structural solutions of walls, coverings (roofs), floors, trusses, beams, etc.
	Basic requirements for engineering and technological equipment	Provide instructions for use and description of heating, ventilation, water supply, sewerage systems, electrical networks, external engineering networks
	Identification of queues and launch complexes, requirements for the future expansion of the enterprise	Give instructions on the allocation of start-up complexes as part of the facility - a list of buildings and structures for each complex separately, indicating the priority and timing of commissioning; if it is planned to expand the enterprise after the completion of a set of design works, then indicate the requirements to be taken into account in the project being developed.
	Requirements and conditions for the development of environmental measures and activities	Indicate the need to develop a section on assessing the impact of the facility on the environment. In this case, the “Security” section environment» is developed as part of project documentation in accordance with regulatory requirements. The most common reference is to the technical specifications of environmental organizations.
	Requirements for ensuring living conditions for people with limited mobility	Specify additional requirements for ensuring access for disabled people to the facility that are not specified in the requirements of regulatory documentation.
	Occupational safety and health requirements	If a section “Organization and working conditions of workers” is developed as part of the project documentation, indicate the requirements for this section. Suitable for industrial facilities.
	Requirements for environmental and sanitary-epidemiological conditions	Specify additional requirements for design documentation based on the conclusion of the SES and Rospotrebnadzor.
	Requirements for the development of engineering and technical measures for civil defense and emergency prevention measures (CiE)	If the object is categorized according to civil and emergency situations (technical specifications are issued authorized body on Civil Defense and Emergency Situations), provides a link to the technical specifications for Civil Defense and Emergency Situations and provides instructions on the need to develop this section.
	Requirements for developing a fire safety section	The section is required to be developed in accordance with the requirements of regulatory documentation. Specify additional requirements for the development of this section.
	Requirements for developing a section for assessing the energy efficiency of building envelopes	Section – “Measures to ensure compliance with energy efficiency requirements and requirements for equipping buildings, structures and structures with metering devices used energy resources» is mandatory when developing project documentation. Additional requirements or instructions for equipping the facility with energy metering devices are indicated."
	Requirements for the method of drawing up estimate documentation	Basis-index method. Resource method – in current prices.
	Requirements for carrying out development and research work during the design and construction process	Indicate if such work is required during the design process. Usually this item is simply excluded.
	Requirements for the implementation of demonstration materials	Filled out if it is necessary to make a mock-up of an object, 3D presentations, demonstration albums, etc., indicating the requirements for demonstration materials.
	Special technical requirements for which there are no regulatory requirements	In practice, this paragraph is replaced by “Additional requirements”, which indicate the requirements for the preparation of design and estimate documentation, the number of copies of the project and the availability of an electronic copy, and other customer conditions for the development of project documentation.

The following documents are attached to the technical specifications:

copy of the federal target program, development programs of a constituent entity of the Russian Federation, comprehensive program development of a municipal formation, departmental target program or other programs;
a copy of the decision of the President of the Russian Federation, the Government of the Russian Federation, state authorities of the constituent entities of the Russian Federation and local governments in accordance with their powers;
a copy of the developer's decision;
copies of title documents for a capital construction project;
justification for construction investments of this object(business plan - carried out by the customer’s enterprise or section of the technical and economic plan carried out design organization with two-stage design at the Project stage);
an approved and duly registered urban planning plan for the land plot provided for the placement of a capital construction project;
information about land plots seized temporarily (for the construction period) and (or) permanent use, justification for the size of the withdrawn land plot, if such dimensions are not established by the norms for land allocation for specific types of activities, or the rules of land use and development, or planning projects, land surveying - if it is necessary to withdraw the land plot;
information about the category of land on which the capital construction project is (will be) located;
information on the amount of funds required to compensate losses to the rights holders of land plots - in the event of their seizure for temporary and (or) permanent use;
documents on the use of land plots to which town planning regulations do not apply or for which town planning regulations are not established, issued in accordance with federal laws by authorized federal authorities executive power, or authorized executive bodies of constituent entities of the Russian Federation, or authorized local government bodies;
materials and results of public hearings;
permission to deviate from the maximum parameters of the permitted construction of capital construction projects (if necessary);
materials on existing and preserved buildings, green spaces;
decision of a local government body to recognize a building (structure, structure) as unsafe and subject to demolition;
acts (decisions) of the owner of the building (structure) on the decommissioning and liquidation of a capital construction project - if demolition (dismantling) is necessary;
information on the expected costs associated with the demolition of buildings and structures, relocation of people, relocation of engineering support networks (if necessary);
information about the capital construction project’s need for fuel, gas, water and electrical energy;
technical specifications for:
- connecting the facility to water supply networks;
- connecting the facility to sewerage networks;
- connecting the facility to power supply networks;
- design of external lighting of the territory;
- connecting the facility to gas supply networks;
- connecting the facility to heat supply networks;
- connecting the facility to telephone networks;
- connecting the facility to radio networks;
- connecting the facility to television broadcasting networks;
- organization of traffic from the traffic police;
documents on approval of deviations from the provisions of technical specifications;
information on production technology, descriptions and passports for the main technological equipment;
information about the raw material base, production needs for water, fuel and energy resources - for industrial facilities;
information on the integrated use of raw materials, secondary energy resources, production waste - for industrial facilities;
data on the design capacity of the capital construction project, the significance of the capital construction project for settlements (municipalities), as well as on the number of workers and their professional qualifications (list of professions, positions and their codes in full accordance with OK 016-94), payroll and attendance of workers, work shifts (except for residential buildings) and other data characterizing the capital construction project - for non-production facilities;
information about work and rest schedules, shift duration, duration of breaks, workplace equipment, training and retraining of workers, medical examinations, labor protection, facility security;
information about potentially dangerous and harmful technological installations, harmful technological processes, harmful emissions during the production process, industrial hazards;
technological layouts of existing workshops, areas with specifications of equipment and information about its condition - for non-production facilities;
technical conditions for the development of the civil defense and emergency section, which should contain information on the category of the object for Civil Defense, the category of the settlement where the object is located, according to Civil Defense, the presence of existing protective structures and the nature of their use in peacetime, locations of personnel in the event of an emergency threats of emergency situations, the possibility of an emergency situation occurring at the site, based on technological process indicating the types of impact and damaging factors, the possibility of an emergency situation occurring at the site as a result of accidents at nearby, potentially dangerous objects, indicating the distance to them, the possibility of occurrence at the site emergency, the source of which is dangerous natural processes, the possibility of moving or ceasing the activity of an object in wartime, the presence of a mobilization task;
information about specific industrial waste (if any), organization of waste collection (places of storage and processing, removal, copy of the waste removal agreement);
sanitary and epidemiological conclusion for the land plot based on the results of the sanitary and epidemiological examination;
certificate of the results of the radiation survey of the site;
certificate of results on the results of soil sampling at the site;
certificate of background concentrations
certificate of the presence (absence) of minerals on the site being built;
available materials from engineering (engineering-geological) surveys and surveys, measurement drawings of buildings and structures existing on the construction site, underground and surface networks and communications (if the work is not provided for by the contract);
conditions for the placement of temporary buildings and structures, lifting and transport machines and mechanisms, storage areas for construction materials (if required);
additional initial data for calculating estimate documentation:
- work conditions and complicating factors, for example cramped conditions, etc.;
- costs of allocating a land plot, issuing an Urban Development Plan and identifying red building lines;
- costs of laying out the main axes of buildings and structures, transferring them into reality and securing them with points and signs;
- costs associated with obtaining initial data, technical specifications for design and carrying out the necessary approvals for design solutions, as well as performing, at the request of local governments, an executive control survey of constructed utility networks;
- costs associated with compensation for demolished buildings and plantings, damage to the natural environment incurred on the alienated territory, compensation for damages and losses for the transfer of buildings and structures (or construction of new buildings and structures to replace those demolished), for compensation for losses caused by water management activities , termination or change in the conditions of water use, to compensate for losses of agricultural production during land acquisition;
- costs associated with payment for connecting the facility to engineering networks;
- costs of transporting workers of construction and installation organizations by road (for objects in the region);
- costs associated with sending workers to perform construction, installation and special work (for facilities in the region);
- costs associated with the relocation of construction equipment;
- costs of organizing and conducting contract bidding (tenders);
- costs of maintaining the customer-developer service;
- costs associated with the supply of equipment carried out by the Customer;
- distance of transportation of low-quality soil and waste;
- costs associated with the disposal of solid waste and poor-quality soil;
- distance for transporting quality soil.
- distance of transportation of plant soil.
- transport scheme for the transportation of local materials (for objects in the region).

Provide cap. repair in 2 stages:

Stage 1 – building on the street. Lodygina, 14;

Stage 2 – building on the street. Lodygina, 16.

The composition of the design documentation must meet the requirements current legislation RF.

Issue design documentation in 4 copies to on paper and one copy in in electronic format in pdf format.

Execute working documentation for major renovation complex of buildings:

Execute section PP ( Explanatory note) consisting of:

General description of events;
Descriptive part on the territory of the object;
Initial permitting documents;

Complete the BO section (Landscaping, vertical planning, landscaping)

Situational plan;
Organization of relief (vertical layout);
Construction of driveways and pedestrian paths;

Complete section AC (Architectural and construction part), the section should include:

Architectural and construction working drawings - plans, facades, sections;
Description of interior and exterior decoration;
Calculation of insolation;
Calculation of natural lighting;
School layout in compliance with SanPiN 2.4.2.2821-10, SanPiN 2.4.5.2409-08 and SNiP 06/31/2009, and new fire safety regulations (1-13).13130.2009, new technical regulations on building safety (N 384-ФЗ dated December 31 2009) and fire safety (N 123-FZ dated July 22, 2008) and, if necessary, redevelopment (availability and adequacy of the necessary premises, microclimate parameters);
Finishing of premises (including finishing of walls in common corridors and finishing of floors with materials that meet fire safety requirements);

Complete section KS (Engineering and design part), as part of the section provide:

Engineering design working drawings -general form structures, details;
Strengthening foundations according to the survey (if necessary);
Replacement of floors, according to survey data;

Replacement or repair of elements of the roof truss system, according to the data surveys - building at the address st. Lodygina, 16:

Replacement of roofing and sheathing;
Installation of a snow retention system on the roof;

1.6. Replacement of doors (according to fire regulations);

1.7. Strengthening and repairing walls, according to survey data;

1.8. Restoration of the blind area around the perimeter of the buildings;

1.9.Repair of existing entrance groups with partial relocation brickwork, according to the survey data;

1.10. Complete the TX section (Technological solutions), the section should include:

arrangement and selection of equipment in accordance with SANPiN;
description of technological operations;
furniture arrangement;
information about the composition of the institution’s employees;
occupational Safety and Health;
arrangements for the delivery of raw materials;

1.11. Complete the HVAC section (Heating and Ventilation): replacement of the heating and ventilation system, include in the project:

Replacement or repair of the building ventilation system (mechanical and natural ventilation - separate for different functions);
Replacing the heating system:

Repair or replacement (if necessary) of a boiler for heating hot water;
Re-equipment of ITP
Provide energy saving measures in order to increase the efficiency of use of fuel and energy resources.

Information about external heating networks (without designing external networks);

1.12. Complete the VK section (Water supply, sewerage), the project will include:

Replacement of the cold and hot water supply and drainage system (domestic sewerage and external organized storm drainage);
Energy saving measures in order to increase the efficiency of use of fuel and energy resources;
Information about water supply, hot and cold - internal and external;
Information on actual external water supply, sewerage, fire-fighting water supply (without designing new external networks);

1.13. Complete the EO section (Electrical equipment, electric lighting): replacement of the internal power supply system, including (electric internal lighting), the project should include:

information about electrical equipment, including taking into account modern equipment, indoor and outdoor power supply, lighting, electricity meters, lightning protection and grounding (without designing external networks);
Energy saving measures to improve the efficiency of use of fuel and energy resources.

1.14. Complete the section SU (Low-current devices), the project will include:

Design of communication systems: telephone, radio;

1.15. Complete section CC (Communication Networks): the project includes:

Description of multimedia systems: television and Internet (design if necessary);

1.16.Complete the NVN (external video surveillance) section:

Provide a video surveillance system on the school grounds, cameras around the perimeter of the building.

1.17. Complete the fire safety section (measures to ensure fire safety), which includes the following:

Fire breaks and passages along the perimeter of the building;
Distance to fire station;
Distances to fire-hazardous buildings and structures (gas pipelines, gas stations, etc.);
Description of external fire water supply - location of fire hydrants and flow rate supplied to them (without design);
Calculation of the required width and length of escape routes, stairs and exits;
Design of alarm systems ( Security and fire alarm), SOUE (Warning and evacuation control system in case of fire);
The degree of fire resistance of the building and the fire resistance limits of the building structures;
Fire barriers, doors, hatches;

1.18.Complete the EA section (Automatic control of engineering equipment systems);

1.19. Complete the PIC section (construction organization project), the sections include:

Technology and sequence of work, their duration, necessary resources;
Stroygenplan;
Calculation of construction needs for temporary buildings, electricity, water supply, sewerage and fire fighting;
Calculation of construction duration;

1.20.Complete the section on environmental protection (environmental protection), the section should include:

Calculation of air and land pollution during construction and dispersion of harmful substances;
Measures for collection of solid waste during operation;

1.21. Carry out the MDI section (measures to ensure access for people with disabilities) - if necessary, only access to the building and the territory of the building;

1.22. Complete sections: CM (budget documentation), as part of the section provide:

All estimates must be calculated at the price level of 2000 and 2012;
Recalculation to 2012 carry out according to coefficients for individual cost items
Local estimates;
Object estimate;
Cost summary;
Summary estimate;
The cost of technological, production equipment and inventory should be included in the summary estimate.

1.23.Section EF (Energy Efficiency) to provide

1.24. Section ITM of Civil Defense and Emergency Situations shall not be provided on the basis of clause 14, article 48 of the Town Planning Code of the Russian Federation.
When developing the project, be guided by Federal Law No. 123-FZ of July 22, 2008 “Technical Regulations on Fire Safety Requirements”, Federal Law No. 384-FZ “Technical Regulations on the Safety of Buildings and Structures”, MDS 13-1.99 (2000), GOST R 21.1101 -2009 “Basic requirements for design and working documentation”, SNiP 2.04.01-85 “Internal water supply and sewerage”, SP 40-102-2000 “Design and installation of pipelines for water supply and sewerage systems made of polymeric materials”, SP 40-107- 2003 “Design, installation and operation of internal sewerage systems made of polypropylene pipes”, GOST 21.601-79* “Water supply and sewerage. Working drawings", SNiP 41-01-2003 "Heating, ventilation and air conditioning", SNiP 3.05.01-85 "Internal sanitary systems", GOST 21.602-2003 "Rules for the execution of working documentation for heating, ventilation and air conditioning", SanPiN 2.4 .2.2821-10, SanPiN 2.4.5.2409-08, Decree of the Government of the Russian Federation dated February 16, 2008. No. 87 “On the composition of sections of design documentation and requirements for their content” and other construction regulatory documents in force in the Russian Federation.

MINISTRY OF CONSTRUCTION OF THE RUSSIAN FEDERATION

ORDER

In accordance with paragraph five of paragraph 3 of the Decree of the Government of the Russian Federation of May 12, 2017 N 563 “On the procedure and grounds for concluding contracts, the subject of which is the simultaneous execution of work on the design, construction and commissioning of capital construction projects, and on making changes in some acts of the Government of the Russian Federation" (Collection of Legislation of the Russian Federation, 2017, No. 21, Art. 3015)

I order:

1. Approve:

a) a standard form of assignment for the design of a capital construction project in accordance with Appendix No. 1 to this order;

b) requirements for the preparation of assignments for the design of a capital construction project in accordance with Appendix No. 2 to this order.

2. Control over the implementation of this order is entrusted to the Deputy Minister of Construction and Housing and Communal Services of the Russian Federation Kh.D. Mavliyarov.

Minister
M.A. Men

Registered
at the Ministry of Justice
Russian Federation
May 3, 2018,
registration N 50960

Appendix No. 1. Standard form of assignment for the design of a capital construction project

Appendix No. 1

APPROVED

and housing and communal services
Russian Federation
dated March 1, 2018 N 125/pr

standard form

Design assignment for a capital construction project

I. General information

1. Basis for designing the facility:

(indicate the name and point of the state, municipal program, owner's decision)

2. Developer (technical customer):

3. Investor (if any):

(name, postal address, main state registration number and an identification number taxpayer)

4. Design organization:

(indicate name, postal address, main state registration number and taxpayer identification number)

5. Type of work:

(construction, reconstruction, major repairs (hereinafter referred to as construction)

6. Source of financing for the construction of the facility:

(indicate the name of funding sources, including the federal budget, regional budget, local budget, extra-budgetary funds)

7. Technical conditions for connecting (attaching) the facility to engineering support networks (if any):

8. Requirements for identifying stages of construction of an object:

(indicate information about the need to distinguish construction stages)

9. Construction period of the facility:

10. Requirements for the main technical and economic indicators of the facility (area, volume, length, number of floors, production capacity, throughput, cargo turnover, traffic intensity and other indicators):

11. Identification features of an object are established in accordance with Article 4 of the Federal Law of December 30, 2009 N 384-FZ “Technical Regulations on the Safety of Buildings and Structures” (Collected Legislation of the Russian Federation, 2010, N 1, Art. 5; 2013, N 27, Art. 3477) and include:

11.1. Purpose:

11.2. Object affiliation transport infrastructure and other objects whose functional and technological features affect their safety:

11.3. The possibility of the occurrence of hazardous natural processes and phenomena and man-made impacts in the territory where the construction of the facility will be carried out:

11.4. Belonging to the dangerous production facilities:

(if the object belongs to hazardous production facilities, the category and hazard class of the object are also indicated)

11.5. Fire and explosion hazard:

11.6. Availability of premises with permanent occupancy:

11.7. Level of responsibility (established in accordance with paragraph 7 of part 1 and part 7 of article 4 of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures":

(high, normal, low)

12. Requirements for the need for design documentation to comply with the safety justification of a hazardous production facility:

(indicated in case of preparation of design documentation in relation to a hazardous production facility)

13. Requirements for quality, competitiveness, environmental friendliness and energy efficiency of design solutions:

(requirements are indicated that the design documentation and decisions made in it must comply established requirements(it is necessary to indicate a list of details of regulatory legal acts, technical regulations, normative documents), and also comply with the established energy efficiency class (not lower than class “C”)

14. The need to perform engineering surveys to prepare design documentation:

(the need to carry out engineering surveys is indicated to the extent necessary and sufficient for the preparation of design documentation, or the details (attached) of engineering survey materials necessary and sufficient for the preparation of design documentation are indicated)

15. Estimated (marginal) cost of construction of the facility:

(indicates the cost of construction of the facility, determined using aggregated construction price standards, and in their absence - taking into account documented information about estimated cost objects similar in purpose, design capacity, natural and other conditions of the territory on which construction is planned)

16. Information on sources of financing for the construction of the facility:

II. Requirements for design solutions

17. Requirements for the planning organization of a land plot:

18. Requirements for the right-of-way design:

19. Requirements for architectural and artistic solutions, including requirements for graphic materials:

(indicated for production and non-production objects)

20. Requirements for technological solutions:

21. Requirements for constructive and space-planning solutions (indicated for production and non-production facilities):

21.1. The procedure for selecting and using materials, products, structures, equipment and their approval by the developer (technical customer):

(indicates the procedure for the design organization to send options for the materials, products, structures, equipment used and for their consideration and approval by the developer (technical customer)

21.2. Requirements for building structures:

(including requirements for the use of high-quality wear-resistant, environmentally friendly materials in structures and finishing)

21.3. Foundation requirements:

(indicates the need to develop foundation solutions taking into account the results of engineering surveys, as well as technical and economic comparison of options)

21.4. Requirements for walls, basements and basements:

21.5. Requirements for external walls: